| ratio | |
|---|---|
| Side Gear Spline Teeth | |
| Bearing Cone | |
| Bearing Cup | |
| Notes | 4-Pinion All Dana 60 units with the "Reverse Cut-High Pinion" must use 4:10 & down Case no matter what gear ratio is being used. Does not work with C-Clip axles. For Currie Housings opposite rat |
| Make | Model | Year |
|---|---|---|
| CHEVROLET | 1 TON K30/V30 FRONT | 1977 - 1991 |
| CHEVROLET | COMMERCIAL UTILITY CARGO | 1984 - 1988 |
| CHEVROLET/GMC | 1 TON PICKUP | 1975 - 1987 |
| CHEVROLET/GMC | 1 TON VANS | 1979 - 2012 |
| CHEVROLET/GMC | 3/4 TON PICKUPS | 1964 - 1977 |
| CHEVROLET/GMC | SUBURBAN | 1975 - 1987 |
| DODGE | 1 TON D-700 / W-350 / 3500 | 1975 - 2002 |
| DODGE | 3/4 TON D-600 / W-250 / 2500 | 1975 - 2002 |
| DODGE | CHALLENGER | 1970 - 1971 |
| DODGE | CHARGER & R/T | 1966 - 1972 |
| DODGE | CORONET & R/T | 1966 - 1970 |
| DODGE | RAM 2500 (V8 ONLY) | 1994 - 2002 |
| DODGE | RAM 2500/3500 | 1963 - 1993 |
| DODGE | RAM SRT-10 | 2004 - 2006 |
| DODGE | SUPER BEE | 1968 - 1972 |
| FORD | F250 OPTIONAL | 1974 - 1979 |
| FORD | F250 OPTIONAL | 1999 - 2011 |
| FORD | F350 OPTIONAL | 1974 - 2011 |
| FORD | F450 / F350 | 2000 - 2004 |
| JEEP | 4000 | 1971 - 1973 |
| JEEP | 4600 | 1971 - 1973 |
| JEEP | 4700 | 1971 - 1973 |
| JEEP | J2600 | 1968 - 1970 |
| JEEP | J2700 | 1968 - 1970 |
| JEEP | J3600 | 1968 - 1970 |
| JEEP | J3700 | 1968 - 1970 |
| PLYMOUTH | BELVEDERE | 1966 |
| PLYMOUTH | ROAD RUNNER | 1968 - 1972 |
| PLYMOUTH | SATELLITE | 1966 |
| STUDEBAKER | E12 3/4t & E14 1T | 1956 - 1964 |